Using a compressor nebulizer machine is straightforward, but following the correct steps ensures effective medication delivery. Here’s a step-by-step guide:
Before You Start
- Wash your hands with soap and water.
- Place the nebulizer on a clean, flat surface.
- Make sure all parts are clean and dry.
Step 1: Prepare the Medication
- Open the medicine cup of the nebulizer.
- Pour the prescribed medication into the cup, following the dosage instructions.
- Close the cup securely to prevent leaks.
Step 2: Assemble the Nebulizer
- Attach the medicine cup to the mouthpiece or mask.
- Connect the air tubing to the nebulizer machine and the medicine cup.
- Ensure all connections are tight.
Step 3: Power On the Nebulizer
- Plug the nebulizer into a power outlet.
- Turn on the machine.
- You should see a fine mist coming from the mouthpiece or mask.
Step 4: Inhale the Medication
- Mouthpiece: Place it between your lips and breathe in deeply and slowly.
- Mask: Secure it over your nose and mouth, ensuring a snug fit.
- Take slow, deep breaths to allow the medication to reach your lungs.
- Continue until all the medicine is used (typically 5-10 minutes).
Step 5: Turn Off and Clean
- Turn off the nebulizer machine and unplug it.
- Disassemble the parts.
- Wash the mouthpiece/mask, medicine cup, and tubing with warm, soapy water.
- Rinse thoroughly and let them air dry.
- Store in a clean, dry place.
Additional Tips
✔ Sit upright for better lung expansion.
✔ Clean the nebulizer after each use to prevent infections.
✔ Replace filters as recommended by the manufacturer.
✔ Consult a doctor if you experience dizziness, rapid heartbeat, or worsening symptoms.
